o GF SAW RENTALS       o USED EQUIPMENT 
               o ORBITAL WELDER RENTALS  

Tube Cutting
Orbitalum (Georg Fischer)
OTM 2.0
Cold Cutting Tube Severing Tool

DWS represents Orbitalum (George Fischer) pipe tools for stainless steel applications.

Orbitalum tools provide precision square cold cuts required for quality fit-up used in orbital welding.

The new OTM 2 provides optimal tube end-preparation for welding joints conforming to industry standards. It offers chip-free cutting of thin-walled stainless steel tubes up to 2".

  • Automatic, orbital cutting process
  • Chip-free, burr-free, deformation-free cuts
  • Perfectly square
  • Quick clamping system, adjustable to different tube tolerances
  • Automatic speed regulation
  • Restart protection
  • Twistable/detachable drive
  • Use in the shop or in the field

Range of Application:

  • OD min 1/4" / 6.35mm
  • OD max 2" / 50.8mm
  • Wall thickness max 0.31" - 0.118" / 0.8 - 3 mm
  • Pipe material: high-alloy steels, non-alloy steels, low-alloy steels, aluminum (only ferritic materials)
  

Technical Specs
Dimension
13.78" x 9.84" x 8.661"
350mm x 250mm x 220mm
Weight
16.5 lbs
8 kg
Output
1010 W / 1.37 hp
Safety Class System
All-insulated class ii, DIN VDE 0740
Speed
24 to 42 rpm
Voltage
100-120 V, 50/60 Hz
200-240 V, 50/60 Hz (not available from DWS)
Vibration
< 2.5 m/s 2
Noise Level
xa. 75 dB (A)